522067 3.7V 1020mAh LiPo Battery

Product Description — 522067

522067 High Voltage Rechargeable Li-Polymer Battery | 3.7V 1020mAh | Scanning Pen · Camera · Mobile Phone · Beauty Instrument

Overview

The 522067 High Voltage Lithium Polymer Battery is a precision-engineered, multi-application rechargeable pouch cell delivering 3.7V nominal voltage and a substantial 1020mAh capacity within a slim 5.2 × 20 × 67mm form factor. Designed specifically for compact yet power-hungry devices, this battery is optimized for scanning pens, digital cameras, mobile phones, and facial beauty instruments — applications that demand both energy density and voltage stability in a narrow, elongated cell geometry.

The high voltage specification ensures that devices with elevated operating voltage thresholds receive clean, consistent power delivery throughout the discharge cycle, maintaining full device functionality from first use to low-battery cutoff without the performance drop-off common in standard-grade LiPo alternatives. Available factory direct with full OEM customization support, the 522067 is the ideal power solution for product manufacturers, repair professionals, and wholesale buyers seeking a reliable, high-performance mid-capacity cell.

Product Specifications

High Voltage vs Standard LiPo — Key Difference

⚡ The 4.35V high voltage charge ceiling unlocks approximately 8–10% more usable energy per charge cycle compared to a standard 4.20V LiPo of equivalent physical size — translating directly into longer device runtime without increasing battery dimensions.

Key Features

• High Voltage 4.35V Charge Ceiling — The defining advantage of the 522067. By raising the charge cut-off from the standard 4.20V to 4.35V, this cell delivers measurably more usable energy per cycle within an identical physical footprint — providing longer scanning sessions, extended shooting time, and more beauty treatment cycles per charge
• Elongated 20 × 67mm Narrow Form Factor — The slim, tall geometry of the 522067 is purpose-designed for scanning pens, stylus-form devices, and slim handheld electronics where internal width is severely constrained but length is available — fitting naturally into the barrel housings of modern scanning and writing devices
• 1020mAh Verified Capacity — Every unit 100% capacity-tested before shipment. The 1020mAh rating reflects actual delivered energy output, providing reliable runtime estimates for scanning pen session length, camera shot counts, and beauty treatment duration
• Scanning Pen Optimized Discharge Profile — Scanning pens place a unique intermittent high-burst load on their battery during active scanning combined with sustained low-drain standby between scans. The 522067’s low internal resistance and high voltage chemistry handle this mixed duty cycle efficiently, maintaining consistent OCR processing performance throughout the battery’s discharge
• Camera & Mobile Phone Grade Stability — Digital cameras and mobile devices are among the most voltage-sensitive consumer electronics — requiring stable, clean power to maintain sensor performance, image processing quality, and display brightness. The flat high-voltage discharge curve of the 522067 maintains consistent performance from a full 4.35V charge through to the 3.0V cutoff
• Beauty Instrument Power Consistency — RF, EMS, LED, and ultrasonic beauty devices require stable voltage to maintain consistent treatment intensity. The high-voltage extended flat discharge region ensures treatment output remains constant throughout the session — not just at the beginning when the battery is fully charged
• Low Internal Resistance ≤ 150mΩ — Minimizes heat generation during peak current demands of camera burst shooting, beauty instrument heating elements, and scanning pen processor spikes — ensuring thermal safety and sustained performance under varied load conditions
• Slim 5.2mm Profile — Fits the tight Z-height constraints of scanning pen barrels, slim camera bodies, and handheld beauty device enclosures without requiring housing redesign
• Built-In Protection Circuit (PCM) — Comprehensive overcharge (calibrated to 4.35V HV ceiling), over-discharge, over-current, and short-circuit protection ensuring safe operation across all four target application categories
• 500+ Cycle Life — Extended rated lifespan suitable for daily-use devices including scanning pens in professional and educational settings, beauty instruments in salon and home environments, and cameras in active use scenarios
• Low Self-Discharge Rate — Retains charge effectively during storage, keeping devices ready for immediate use after periods of inactivity — important for cameras and beauty devices used on an occasional rather than daily basis

Applications

• 🖊️ Scanning pens & AI reading pens / translation pens
• 📷 Compact digital cameras & action cameras
• 📱 Mobile phones & slim smartphones
• 💆 Facial beauty instruments — RF, EMS, LED therapy, ultrasonic
• 🎙️ Portable voice recorders & digital dictation devices
• 📡 Slim GPS trackers & compact tracking modules
• 🌐 Narrow-form IoT devices & elongated sensor modules
• 🔦 Slim handheld instruments & portable measurement tools
• 🏥 Handheld medical diagnostics & personal health devices

Application Deep Dive

Scanning Pens & AI Reading Pens Modern scanning pens incorporate OCR processors, wireless transmission chips, display drivers, and sometimes TTS (text-to-speech) audio — creating a complex, multi-load power demand in an extremely narrow barrel housing. The 522067’s elongated 67mm length fits naturally within pen barrel geometries, while the high voltage chemistry and low IR ensure the processor receives stable, sufficient power during intensive scanning bursts without voltage sag causing OCR errors or connectivity drops.

Digital Cameras Camera battery demands are notoriously unforgiving — image sensors, mechanical shutters, LCD displays, and wireless connectivity all draw simultaneously during shooting. The 522067’s high voltage extended discharge plateau maintains sensor supply voltage above critical thresholds for longer, directly translating to more shots per charge and more consistent image processing performance throughout the session.

Beauty Instruments The most voltage-sensitive application in this group. RF beauty devices in particular tune their output frequency and power based on supply voltage — a drooping battery directly degrades treatment efficacy in ways the user can feel. The 4.35V high voltage ceiling provides an extended stable supply window, ensuring treatment quality remains consistent from the first to the last minute of each session.

Mobile Phones Slim smartphones and feature phones using the 522067 form factor benefit from the high voltage cell’s extra usable energy within the same physical dimensions — effectively increasing battery life without requiring a larger or heavier cell.

Compatibility & Installation Notes

⚠️ High Voltage Charger Requirement — The 522067 requires a charger or charging circuit rated to 4.35V cut-off. Using a standard 4.20V charger will not damage the cell but will leave approximately 8–10% of capacity unused. Always verify your device’s charging circuit supports 4.35V HV LiPo cells before installation.

✅ Dimension Verification — Confirm your device’s battery cavity accepts 5.2 × 20 × 67mm before ordering. Custom thickness and length variants available for OEM orders requiring dimensional adjustment.

🔌 Connector Options — Available with JST-PH 1.25mm, 2.0mm, or custom connector. Specify wire length and polarity at order — photos of original connector accepted for matching.

Why Choose This Battery

• 🏭 Factory Direct — Manufactured entirely in-house with complete process control from HV-grade electrode preparation through final QC testing and dispatch
• ⚡ True High Voltage Cell — Genuine 4.35V charge ceiling with correctly calibrated PCM — not a standard LiPo relabeled as HV
• ✅ In Stock & Ready to Ship — Warehoused inventory available for immediate same or next business day fulfillment
• 🔬 100% Pre-Shipment Testing — Every unit individually tested for capacity, charge cut-off voltage accuracy, internal resistance, and PCM function
• 🔧 Full OEM / ODM Support — Custom connector, wire configuration, PCM rating, capacity, dimensions, and private label branding for volume orders
• 📋 Compliance Documentation — CE, RoHS, UN38.3 Test Report, and MSDS available for global import and regulatory compliance
• 🌍 Global Export Ready — Complete lithium battery hazardous goods documentation managed in-house

Package Contents

• 1× 522067 High Voltage Li-Polymer Battery (3.7V / 1020mAh)
• Optional: JST-PH 1.25 / 2.0mm connector | bare wire leads | custom connector harness | protective film wrap

💡 Volume pricing, private label packaging, and full OEM / ODM configurations available. Provide your device model or original battery specifications — our technical team will confirm HV compatibility and connector configuration before shipment.