Address:
6F No.18 Yucai Rd, Dalingshan Town, Dongguan, Guangdong, China
Business Hours: MonβFri 9AMβ6PM (GMT+8)
Address:
6F No.18 Yucai Rd, Dalingshan Town, Dongguan, Guangdong, China
Business Hours: MonβFri 9AMβ6PM (GMT+8)














$1.12
Model 601430 3.7V 250mAhlithium polymer battery. High energy density with built-in BMS protection. Ideal for portable electronics, wearables and IoT devices. Custom sizes available. HNF Battery manufacturer.
The 601430 3.7V 250mAh Lithium Polymer Pouch Battery is a compact, medium-width rechargeable soft-pack cell designed for slim-profile portable electronics. Measuring just 6.0 Γ 14 Γ 30 mm, it occupies the sweet spot between the ultra-narrow 12mm family and wider standard cells β delivering a meaningful 250mAh / 0.925Wh capacity in a footprint that fits wearable cavities, compact audio devices, and miniature wireless modules. Every cell ships with a pre-installed PCM protection board and is available for OEM/ODM customization.
| Parameter | Value |
|---|---|
| Model | 601430 |
| Dimensions (T Γ W Γ L) | 6.0 Γ 14 Γ 30 mm |
| Nominal Voltage | 3.7V |
| Rated Capacity | 250mAh |
| Watt-Hour Rating | 0.925Wh |
| Full Charge Voltage | 4.20V |
| Discharge Cutoff Voltage | 3.0V |
| Standard Charge Current | 0.5C (125mA) |
| Max Continuous Charge | 1C (250mA) |
| Max Continuous Discharge | 1C (250mA) |
| Internal Impedance | β€ 300mΞ© |
| Cell Configuration | 1S1P |
| Weight | Approx. 4.5g |
| Cycle Life | β₯ 500 cycles (β₯ 80% capacity retention) |
| Charge Temperature | 0Β°C ~ +45Β°C |
| Discharge Temperature | -20Β°C ~ +60Β°C |
| Storage Temperature | -20Β°C ~ +25Β°C (long-term) |
| Storage Humidity | 45 ~ 85% RH |
| Connector | Customizable (JST PH2.0 / Molex / bare leads) |
| Protection (PCM) | Over-charge / Over-discharge / Over-current / Short-circuit |
| Certifications | UN38.3 / CE / RoHS / MSDS |
1. Optimized 14mm Width β More Capacity, Still Slim The 601430’s 14mm width bridges the gap between ultra-narrow 12mm cells (200β220mAh) and standard 20mm+ cells. This makes it the first choice for device designers who need more than 200mAh but cannot accommodate a wider cell β common in second-generation wearables, compact headsets, and slim IoT nodes.
2. 250mAh Capacity in a 30mm Body At just 30mm long, this cell fits shorter cavities where the 601235 (35mm) or 601245 (45mm) would overhang. The compact length combined with 250mAh output gives a best-in-class energy-to-length ratio in the 14mm width family.
3. Factory-Installed PCM β Full Protection Out of the Box The integrated Protection Circuit Module delivers:
No additional protection circuitry required on your PCB for standard low-current applications.
4. Low Self-Discharge Polymer Technology The polymer gel electrolyte offers significantly lower monthly self-discharge compared to liquid-electrolyte cylindrical cells β ideal for products that sit in standby mode for extended periods (smoke detectors, asset trackers, seasonal devices).
5. 500+ Cycle Longevity Rated for over 500 full charge-discharge cycles while retaining β₯80% of original capacity β translating to well over 12 months of real-world daily-use product life in most consumer electronics applications.
6. Full OEM / ODM Support Custom connector types, wire gauge and length, PCM rating, NTC thermistor, label printing, and dimensional variants all available. Engineering samples deliverable in 5β10 business days.
β οΈ Not recommended for drones, RC aircraft, electric tools, or any high-current application. Max continuous discharge is 1C (250mA).
| Model | T Γ W Γ L | Capacity | Best Use Case |
|---|---|---|---|
| 601414 | 6.0 Γ 14 Γ 14 mm | ~100mAh | Ultra-compact coin-size cavities |
| 601420 | 6.0 Γ 14 Γ 20 mm | ~150mAh | Very short narrow housings |
| 601430 β | 6.0 Γ 14 Γ 30 mm | 250mAh | Balanced capacity + length |
| 601435 | 6.0 Γ 14 Γ 35 mm | ~280mAh | Slightly longer, higher capacity |
| 601445 | 6.0 Γ 14 Γ 45 mm | ~350mAh | Max capacity, same width |
Buyers designing across multiple SKUs can consolidate to a single 14mm-width supplier β contact us for bundle pricing and cross-model stocking agreements.
| Item | Options |
|---|---|
| Capacity | 50mAh β 5,000mAh |
| Voltage | 3.7V (1S) / 7.4V (2S) / 11.1V (3S) |
| Dimensions | Any T / W / L within manufacturing range |
| Connector | JST PH1.25 / PH2.0 / Molex 51021 / HRS / bare leads |
| Wire | Length, gauge (AWG), color, direction |
| PCM / BMS | Standard / with NTC thermistor / with fuel gauge IC |
| Label | OEM brand printing, QR code, color label |
| Certifications | UN38.3, IEC62133, CE, UL, KC, CB available |
| Shape | L-shape, curved, ultra-thin, stepped β fully custom |
| Type | Details |
|---|---|
| Standard Sample MOQ | 10 β 100 pcs |
| Custom Sample MOQ | 50 β 200 pcs |
| Bulk MOQ | 500 pcs (negotiable) |
| Sample Lead Time | 5 β 10 business days |
| Mass Production Lead Time | 15 β 30 business days |
| Shipping | DHL / FedEx / UPS / EMS / Sea Freight |
| Warranty | 12 months from shipment date |
| Payment | T/T, PayPal, Alibaba Trade Assurance |
π© Request a datasheet, engineering sample, or volume quote. OEM / ODM orders welcomed. One-year warranty included. Global shipping available.
Reviews
There are no reviews yet.